Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 94)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

4-12

308628-15.0 Rev 00

Using Site Manager

To specify a holddown time, complete the following steps:

Setting a Minimum AS Origination Interval

By default, a BGP speaker that issues an update to advertise a change in the AS

must wait at least 15 seconds before advertising a subsequent change.

You can use the BCC or Site Manager to specify a different interval.

Using the BCC

To specify a different interval, go to a BGP peer prompt (for example,

box; ip;

/jointfilesconvert/97454/bgp; peer/2.2.2.2/2.2.2.3

) and enter:

min-originate-time

seconds>

seconds

is an integer (from 1 through 2,147,483,647) indicating the minimum

number of seconds that BGP waits between advertisements.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on the peer for which you want to

edit parameters.

The parameters for that peer appear in

the window.

8. Set the

Holdtime

parameter. Click on

Help

or see the parameter description on

page A-15.

9. Click on

Apply

, and then click on

Done

. You return to the IP Interface List for BGP

window.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 94

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)