Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 76)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

3-32

308628-15.0 Rev 00

• Maximum holddown time. If the route remains suppressed after the number of

minutes that you specify, BGP unsuppresses it (even if the penalty value

exceeds the threshold). This action does not change the penalty value.

• Memory limit. If the status of the route remains unchanged, either reachable

or unreachable, after the number of minutes that you specify, BGP

unsuppresses the route (if it is suppressed) and resets the penalty value and

flap count to 0.

You can also use the BCC or Site Manager to create a route flap damping template

and a BGP accept policy for route flap damping.

Using the BCC

To create a route flap damping template, go to the BGP prompt (for example,

box;

ip; /jointfilesconvert/97454/bgp

) and enter:

damping-template name <name>

name

is a unique name identifying the template (from 1 through 20 characters).

A template-specific prompt appears.

For example, the following command creates a route flap damping template

named steady:

/jointfilesconvert/97454/bgp#

damping-template name steady

damping-template/steady#

To change the default values of the parameters for a template that you created, go

to the template-specific prompt (for example,

box; ip; /jointfilesconvert/97454/bgp;

damping-template/steady

) and enter:

Table 3-6 l

ists the parameters and values that you can enter

Note:

A route that has been suppressed may not be immediately available for

use as soon as the penalty value crosses the configured threshold.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 76