Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 200

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 276
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 199
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-26
308628-15.0 Rev 00
EGP Neighbor Parameters
Parameter: Remote Peer IP Address
Path: Configuration Manager > Protocols > IP > EGP
Default: None
Options: Any IP address
Function: Specifies the IP address of the remote router that will form an EGP neighbor
relationship with this router.
Instructions: Enter the IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.5
Parameter: Remote Autonomous System IP Address
Path: Configuration Manager > Protocols > IP > EGP > Neighbors > EGP Neighbor >
Add
Default: None
Options: Any IP address
Function: Specifies the IP address of the remote router that will form an EGP neighbor
relationship with this router.
Instructions: Enter the IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.5
Parameter: Gateway Mode
Path: Configuration Manager > Protocols > IP > EGP > Neighbors > EGP Neighbor
Default: Core
Options: Core
|
Non Core
Function: Specifies the gateway mode for this EGP neighbor. If you choose Core (the
default), the local AS to which this EGP neighbor belongs will act as a transit
AS. That is, it will advertise networks that reside within the AS as well as within
external networks. If you choose Non Core, the AS to which this EGP neighbor
belongs will act as a stub AS. That is, it will advertise only networks that reside
within the AS.
Instructions: Set this parameter to Core or Non Core, depending on how you want this EGP
neighbor to function.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.6
Przeglądanie stron 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag