Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 80)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

3-36

308628-15.0 Rev 00

To apply a route flap damping template to an existing BGP accept policy,

complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Policy Filters

. The Policy Filters menu opens.

4. Choose

BGP-4

. The BGP-4 menu opens.

5. Choose

Accept Policies

. The BGP4 Accept Policy Filters window

opens.

6. Click on the accept policy to which you

want to apply route flap damping.

The parameter values for that policy

appear in the window.

7. Set the following parameters:

• BGP Route Flap Dampening

Template

Click on

Help

or see the parameter

descriptions beginning on page A-45

Note: The BGP Route Flap Dampening

Template parameter is grayed out unless

the BGP Route Flap Dampening

parameter is set to ENABLE.

8. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 80

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)