
Site Manager Parameters
308628-15.0 Rev 00
A-27
Parameter: Enable
Path: Configuration Manager > Protocols > IP > EGP > Neighbors > EGP Neighbor
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables an EGP neighbor relationship with the specified IP address.
Instructions: Set this parameter to Disable if you want to temporarily disable this neighbor
relationship rather than delete it. Or set it to Enable if you previously disabled
this neighbor relationship, and now want to reenable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2
Parameter: Acquisition Mode
Path: Configuration Manager > Protocols > IP > EGP > Neighbors > EGP Neighbor
Default: Passive
Options: Passive
|
Active
Function: Specifies which of the two neighbors initiates EGP connections. The router in
the active mode is the initiator.
Instructions: Set this parameter to Active if you want the local EGP neighbor to be the
initiator of EGP connections. Otherwise, accept the default value, Passive.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.7
Parameter: Poll Mode
Path: Configuration Manager > Protocols > IP > EGP > Neighbors > EGP Neighbor
Default: Both
Options: Active
|
Passive
|
Both
Function: Specifies the type of neighbor reachability algorithm that this local EGP
neighbor executes. In active mode, a router sends Hello and poll messages to
request reachability status from its neighbor. In passive mode, a router responds
to Hello and poll messages with I-H-U and update messages.
Instructions: Accept the default value, Both, or set to either Active or Passive (depending on
the neighbor reachability algorithm that you want this router to execute).
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.8
Komentarze do niniejszej Instrukcji