Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 146)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

6-8

308628-15.0 Rev 00

At the session-specific prompt, enter the following command to specify that the

remote peer is a route reflector in another cluster:

peer-mode reflector-external

For example, the following command sequence defines a peer-to-peer session

between two route reflectors (represented by addresses 2.2.2.2 and 2.2.2.3)

located in different clusters in AS 2:

/jointfilesconvert/97454/bgp#

peer local 2.2.2.2 remote 2.2.2.3 as 2

peer/2.2.2.2/2.2.2.3#

peer-mode reflector-external

peer/2.2.2.2/2.2.2.3#

Using Site Manager

To establish a peer-to-peer session with a route reflector in another cluster,

complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on

Add

. The BGP Peer window opens.

8. Set the following parameters:

• Peer Address

•

Peer AS

• Local Address

Click on

Help

or see the parameter

descriptions beginning on page A-11.

9. Set the

Peer Mode

parameter to

Reflector External

(continued)

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 146

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)