Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 179)

Site Manager Parameters

308628-15.0 Rev 00

A-5

Parameter: BGP Intra-AS

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: Enable

Options: Enable

Disable

Function: Specifies whether BGP will perform intra-AS IBGP routing.

Instructions: Transit ASs should use intra-AS routing. Stub or multihomed ASs usually do

not use IBGP intra-AS routing.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.8

Parameter: BGP From Protocols

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: BGP

Options: BGP

All

Function: Controls (if intra-AS routing is enabled) the types of routes that BGP advertises

in any IBGP sessions.

Instructions: Select BGP to propagate only advertised routes learned from external BGP

peers. Select All to propagate routes learned from all route sources (excluding

IBGP and OSPF interarea and intra-area routes, which are never advertised with

IBGP).

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.9

Parameter: BGP Interval Timer

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: 5 seconds

Options: 1 to 2,147,483,647

Function: Specifies the minimum time interval, in seconds, between injections of external

BGP routes into the IP routing table.

Instructions: Accept the default or enter a nonzero value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.10

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 179