
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-46
308628-15.0 Rev 00
Parameter: BGP Route Flap Dampening Template
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: default (when the Route Flap Dampening parameter is set to Enable)
Options: Name of a configured route flap dampening template
Function: Specifies the name of the configured route flap dampening template to apply to
the routes specified by this accept policy.
Instructions: Enter the name of a configured route flap dampening template, or accept the
default template.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.27
Parameter: Multi-Exit Discriminator
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: Passthru
Options: Passthru
|
Override
|
Generate
|
Delete
Function: Indicates whether to accept a multiexit discriminator value for a network
matching this filter, and, if accepted, what value to use. This parameter is valid
only if the value of the Action parameter is set to Accept.
Instructions: Specify one of the following values:
• Passthru (default): the value will be advertised as received.
• Override: the value of the Multi-Exit Discriminator parameter will be used.
• Generate: the value of the Multi-Exit Discriminator parameter will be used if
a MED attribute is not present in the BGP-4 update message.
• Delete: the MED metric will be removed if present in the attribute list.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.27
Komentarze do niniejszej Instrukcji