Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 177)

Site Manager Parameters

308628-15.0 Rev 00

A-3

BGP Configuration Parameters

Parameter: Identifier

Path: Choose BGP in the Select Protocols window.

Default: None

Options: An IP address of an IP interface on this router

Function: Identifies the BGP router. There is no default for this parameter. You must use

an IP address of one of the router’s IP interfaces.

Instructions: Either accept the current BGP identifier or enter a new IP address. The BGP

identifier must be one of the router’s IP interfaces. If both BGP and OSPF are

running on the router, then the BGP and OSPF router IDs must be set to the

same IP interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4

Parameter: Local AS

Path: Select BGP in the Select Protocols window.

Default: None

Options: 1 to 65535

Function: Identifies the autonomous system to which this BGP router belongs.

Instructions: Enter a value from 1 to 65,535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 177