Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 50)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

3-6

308628-15.0 Rev 00

Disabling and Reenabling IBGP Support

By default, BGP supports IBGP intra-AS sessions. (For information, see “BGP

Concepts and Terminology” on page 1-4).

A BGP transit AS should use IBGP intra-AS routing. A stub or multihomed AS

usually does not use IBGP routing.

You can use the BCC or Site Manager to disable and reenable IBGP support.

Using the BCC

To disable and reenable IBGP support, go to the BGP prompt (for example,

box;

ip; /jointfilesconvert/97454/bgp

) and enter:

intra-as-routing

<state>

state

is either

enabled

(default) or

disabled

For example, the following command disables IBGP:

/jointfilesconvert/97454/bgp#

intra-as-routing disabled

/jointfilesconvert/97454/bgp#

4. Choose

BGP Global

. The Edit BGP Global Parameters window

opens.

5. Set the

BGP

Local AS

parameter. Click

Help

or see the parameter description

on page A-4

6. Click on

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 50