
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-4
308628-15.0 Rev 00
BGP Global Parameters
Parameter: BGP Enable
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Globally enables or disables BGP on all router interfaces.
Instructions: Set to Disable if you want to disable BGP for the entire router. Set to Enable if
you previously disabled BGP and now want to reenable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.2
Parameter: BGP Identifier
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: None
Options: An IP address of an IP interface on this router
Function: Identifies the BGP router. There is no default for this parameter. You must use
an IP address of one of the router’s IP interfaces.
Instructions: Either accept the current BGP identifier or enter a new IP address. The BGP
identifier must be one of the router’s IP interfaces. If both BGP and OSPF are
running on the router, then the BGP and OSPF router IDs must be set to the
same IP interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4
Parameter: BGP Local AS
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: The current BGP Local AS value
Options: 1 to 65535
Function: Identifies the autonomous system to which this BGP router belongs.
Instructions: Either accept the current BGP Local AS value or enter a new value for this
parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5
Komentarze do niniejszej Instrukcji