Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 212

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 276
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 211
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-38
308628-15.0 Rev 00
Parameter: Route Origin
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept
Policies
Default: Any
Options: Any
|
IGP
|
EGP
|
IGP or EGP
|
Incomplete
|
Incomplete or IGP
|
Incomplete
or EGP
Function: Specifies the values of the BGP origin path attribute that apply to this policy.
Instructions: Select the origin values you want to accept for this policy.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.13
Parameter: BGP-3 Route Preference
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept
Policies
Default: 1
Options: 1 to 16
Function: Specifies a value that is used to compare a route that matches this policy with
other BGP-3 routes that match the policy. The larger the value, the greater the
preference.
Instructions: To specify maximum preference, enter 16. This parameter is valid only if the
Action parameter is set to Accept.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.14
Parameter: Weight Class
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept
Policies
Default: Weight class 1
Options: Weight class 1 to weight class 8
Function: Indicates which weight class should be used when calculating the AS path
weight.
Instructions: Set the Action parameter to Accept and supply a valid BGP-3 weight class.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.15
Przeglądanie stron 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag