Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 15)

308628-15.0 Rev 00

Preface

Routers at the borders or edges of autonomous systems are called gateways. These

gateways use exterior gateway protocols to exchange reachability information

with each other and route packets between routing domains. This guide describes

how to configure and use the IP Border Gateway Protocol (BGP) and the Exterior

Gateway Protocol (EGP).

You can use the Bay Command Console (BCC*) or Site Manager to configure

BGP and EGP on a router. In this guide, you will find instructions for using both

the BCC and Site Manager.

Before You Begin

Before using this guide, you must complete the following procedures. For a new

router:

• Install the router (see the installation guide that came with your router).

• Connect the router to the network and create a pilot configuration file (see

Quick-Starting Routers

Configuring Remote Access for AN and Passport

ARN Routers

, or

Connecting ASN Routers to a Network)

Make sure that you are running the latest version of Nortel Networks* BayRS*

and Site Manager software. For information about upgrading BayRS and Site

Manager, see the upgrading guide for your version of BayRS.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 15