Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 148)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

6-10

308628-15.0 Rev 00

Configuring an RR Client

An RR client is a BGP/IBGP speaker with a peer-to-peer session with a route

reflector and one or more peer-to-peer sessions with external BGP speakers.

You can use the BCC or Site Manager to establish a peer-to-peer session with one

or more route reflectors in the same cluster.

Using the BCC

To establish a peer-to-peer session between an RR client and a route reflector in

the same cluster, go to the BGP prompt (for example,

box; ip; /jointfilesconvert/97454/bgp

) and enter

peer local

<client_address>

remote

<reflector_address>

<as_number>

client_address

is the IP address on the local client.

reflector_address

is the IP address on the remote reflector.

as_number

is the AS where the client and the server reside.

At the session-specific prompt, enter:

peer-mode none

For example, the following command sequence defines a peer-to-peer session

between an RR client and a route reflector (represented by addresses 2.2.2.2 and

2.2.2.3):

/jointfilesconvert/97454/bgp#

peer local 2.2.2.2 remote 2.2.2.3 as 2

peer/2.2.2.2/2.2.2.3#

peer-mode none

peer/2.2.2.2/2.2.2.3#

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 275 276

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 148