Avaya Troubleshooting Routers Instrukcja Naprawy Pobierz pdf (Strona 80)

Troubleshooting Routers

5-2

308656-14.00 Rev 00

Troubleshooting an ATM Connection

This section assumes that you have isolated a problem to an ATM interface. If not,

refer to Chapter 2 to determine whether these instructions apply.

How you troubleshoot ATM depends on your ATM configuration. First, follow the

steps in the section “Interface Problems

.” Then, see “Troubleshooting ATM

LANE” on page 5-7, if applicable.

Interface Problems

Troubleshoot an ATM connection as follows:

Use the Events Manager or the Technician Interface to enable extended

debugging for the wfAtmInterface MIB objects.

The Technician Interface command is as follows:

g wfAtmInterfaceConfEntry.wfAtmInterfaceDebug.*

Filter the log to display only messages from the ATM entity running on

the slots experiencing the problem.

The Technician Interface command is as follows:

log -fftwid -eATM -eATMINTF -s

<slot_no.>

For example, if you are filtering events from slots 3 and 4, enter the following

command:

log -fftwid -eATM -eATMINTF -s3 -s4

Use the Events Manager or the Technician Interface to display the

attributes associated with the MIB objects in Tab le 5- 1

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 267 268

Brak uwag

Avaya Troubleshooting Routers Instrukcja Naprawy Strona 80