Avaya Troubleshooting Routers Instrukcja Naprawy Pobierz pdf (Strona 237)

Using the Technician Interface to Configure and Run Packet Capture

308656-14.00 Rev 00

B-43

Parameter: Line Number

Attribute Name: wfPktCaptureLineNumber

Attribute Number: 7

Default: Set by Packet Capture code

Options: Based on the encoded value

Function: Uniquely identifies a circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.7

Parameter: Buffer Size

Attribute Name: wfPktCaptureBufSize

Attribute Number: 8

Default: None

Options: 1 (allocates 1024 bytes)

2 (allocates 2048 bytes)

Up to the available

contiguous memory divided by 1024

Function: Sets the size of the file stored in buffer memory, in 1024-byte increments.

The upper limit is the maximum number of contiguous bytes of memory

available on the slot. You can determine the maximum number of

contiguous bytes by entering the following command:

get wfKernelEntry.6.

represents the wfKernelMemoryMaxSegFree attribute.

Instructions: If the allocation of the buffer leaves less than 200 KB of memory, a

warning appears in the log. The operating system may need to allocate

and free memory. If the memory needed is not available, an error occurs.

If errors occur after you start Packet Capture, stop it and allocate a smaller

buffer size.

MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.8

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 267 268

Brak uwag

Avaya Troubleshooting Routers Instrukcja Naprawy Strona 237