Avaya Troubleshooting Routers Instrukcja Naprawy Pobierz pdf (Strona 177)

Reading the Event Log

308656-14.00 Rev 00

A-21

# 68: mm/dd/yy 14:15:35.132 TRACE SLOT 2 PPP Code: 44

Sending IPCP Configure-Ack on circuit 3.

# 69: mm/dd/yy 14:15:35.132 INFO SLOT 2 PPP Code: 28

IPCP up on circuit 3.

The following messages indicate that the Raise DTR signal causes the software to

establish the link and activate the upper-layer protocol. ULI stands for upper-layer

indication:

# 70: mm/dd/yy 14:15:35.136 DEBUG SLOT 2 SWSERV Code: 46

Connector COM2: FSM State: RDTR_WAIT_FOR_ULI(3)

Connector COM2: FSM Event: RDTR_EVENT_ULI_IND(8); isdn flags: 0x22e

# 71: mm/dd/yy 14:15:56.980 DEBUG SLOT 2 SWSERV Code 46

Connector COM2: FSM State: RDTR_CONNECTED(4)

Connector COM2: FSM Event: RDTR_EVENT_DSR_DN(4); isdn flags: 0x224

The router detected that the modem dropped DSR, indicating that the remote link

is lost.

# 72: mm/dd/yy 14:15:56.980 TRACE SLOT 2 MODEMIF Code: 32

Connector COM2: DSR lost connection closed.

The router exceeds its inactivity timeout threshold, and drops DTR to terminate

the connection to the modem.

# 73: mm/dd/yy 14:15:56.980 DEBUG SLOT 2 SWSERV Code: 46

isdn_down_cct - calling drop_dtr

The router disables PPP.

# 74: mm/dd/yy 14:15:56.980 INFO SLOT 2 PPP Code: 31

Stopping Network Control Protocols on circuit 3.

IPCP down on circuit 3.

LCP down on circuit 3.

# 75: mm/dd/yy 14:15:57.035 INFO SLOT 2 SYNC Code: 13

Connector COM2 LLC1 service withdrawn.

The following message is normal after a dial-on-demand connection terminates:

# 76: mm/dd/yy 14:15:57.039 DEBUG SLOT 2 SWSERV Code: 46

Demand line failed for circuit 3.

sw_dd_line_fail set in use circuit to zero for com 2.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 267 268

Brak uwag

Avaya Troubleshooting Routers Instrukcja Naprawy Strona 177