Avaya Troubleshooting Routers Instrukcja Naprawy Pobierz pdf (Strona 128)

Troubleshooting Routers

6-18

308656-14.00 Rev 00

Example

$show ipx circuit

IPX Circuit Configuration Information (ALL)

-------------------------------------------

Circuit State Net Address Host Address Encaps Method

-------- -------- ------------ ---------------- -------------

O22 Up 0x2E000011 0x0000A20E08D4 LSAP

E44 Up 0x2E008000 0x0000A2030079 Ethernet

E32 Up 0x2E009000 0x0000A2035A5E LSAP

E33 Up 0x2E010000 0x0000A2035A5F LSAP

E42 Up 0x2E036000 0x0000A2030077 Novell/802.3

O21 Up 0x2E060010 0x0000A20E08D3 LSAP

O23 Up 0x2E060100 0x0000A20E08D5 LSAP

7 Circuits in table.

If you configured the router to run RIP, make sure that IPX RIP is up on

the circuits in question.

To do this, use the Statistics Manager to view the IPX RIP Interface Table

screen, or enter the following Technician Interface script command:

show ipx rip

The IPX RIP Interface Table shows whether you configured the RIP interfaces

with RIP Supply, RIP Listen, or Standard (both RIP Supply and RIP Listen).

Note:

If an interface running IPX and Bridge receives a packet with an IPX

encapsulation type that is different from that configured on the interface, the

Bridge sends it to other interfaces running Bridge. IPX reads only the IPX

packet encapsulation types that you configure it to read. Therefore, you must

be careful when configuring the packet encapsulation types in an IPX network.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 267 268

Brak uwag

Avaya Troubleshooting Routers Instrukcja Naprawy Strona 128