Avaya Troubleshooting Routers Instrukcja Naprawy Pobierz pdf (Strona 106)

Troubleshooting Routers

5-28

308656-14.00 Rev 00

The display shows the settings for all synchronous ports on all slots in the

following format:

wfSyncEntry.wfSyncClkSource.

<slot_no.>

<connector_no.>

The setting is 1 for internal clocking or 2 for external clocking.

If any of the clock source settings are 1 (for internal clocking), enter the

following command to check the clock speed:

get wfSyncEntry.14.*

The console displays the transmission and reception clock speed for each slot

and connector on the router. All ports configured for internal clocking in a slot

use the clock speed of the port most recently configured for internal clocking.

The clock speed is valid only for the slots that are set for internal clocking.

Valid clock speeds are as follows: 1200 (1200b), 2401 (2400b), 4807 (4800b),

7204 (7200b), 9615 (9600b), 19230 (19200b), 32051 (32000b), 38461

(38400b), 56818 (56k), 64102 (64k), 125000 (125k), 227272 (230k), 416666

(420k), 625000 (625k), 833333 (833k), 1250000 (1mb), 2500000 (2mb), and

5000000 (5mb).

Troubleshooting a Token Ring Connection

This section assumes that you have isolated a problem to a token ring connection.

If not, refer to Chapter 2 to determine whether these instructions apply to your

problem.

Troubleshoot a token ring connection as follows:

Filter the log to display only messages from the token ring entity running

on the slots experiencing the problem.

The Technician Interface command is as follows:

log -fftwid -eTOKEN -s

<slot_no.>

Example

If you are filtering events from slots 3 and 4, enter the following command:

log -fftwid -eTOKEN -s3 -s4

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 267 268

Brak uwag

Avaya Troubleshooting Routers Instrukcja Naprawy Strona 106