
Configuring IP Utilities
1-22 117358-A Rev. A
Using Site Manager
To disable and reenable NTP on the router, complete the tasks in the following
table.
Starting NetBIOS over IP
You can easily start NetBIOS over IP and configure it on a circuit using Site
Manager default parameter values. If you decide to change some or all of the
defaults, see to the instructions in Chapter 8, “Customizing NetBIOS over IP.” For
a list of NetBIOS over IP parameters, see Appendix B.
Before you begin, verify that you have configured IP on an interface, as described
in “Confi
guring IP for Global Protocols,” on page 1-6.
To start NetBIOS over IP, perform the following actions:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose NTP. The NTP menu opens.
4. Choose Global. The Edit NTP Global Parameters window
opens.
5. Set the Enable/Disable parameter. Click
on Help or see the parameter description
on page A-17.
6. Click on OK.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
Choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
(continued)
Komentarze do niniejszej Instrukcji