Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 85)

100

101

Configuring and Customizing IP

117356-E Rev 00

3-23

Disabling and Reenabling an IP Interface

When you configure an IP interface on a circuit, the interface is automatically

enabled. You can use the BCC or Site Manager to change the state of the IP

interface as required.

Using the BCC

To disable or reenable an IP interface, navigate to an IP interface prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0

) and enter:

state

<state>

state

is one of the following:

enabled

(default)

disabled

For example, the following command disables IP interface 2.2.2.2:

ip/2.2.2.2#

state disabled

ip/2.2.2.2#

Using Site Manager

To disable or renable an IP interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Interfaces

. The IP Interface List window opens.

4. Click on the interface that you want to edit. Site Manager displays the parameter

values for that interface in the IP Interface

List window.

5. Set the

Enable

parameter. Click on

Help

or see the parameter description on page

A-4

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 85

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring IP, ARP, RIP, and OSPF Services