Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 347

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 362
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 346
117356-E Rev 00
E-1
Appendix E
IP/OSPF Configuration Example
The IP/OSPF configuration in Figure E-1 shows an AS divided into different
types of OSPF areas using several types of OSPF routers and interfaces as well as
variable-length subnetting. This appendix describes parameter settings for router 1
through router 6. Routers W through Z and A through D are included in the figure
to complete the network map.
In the configuration in Figure E-1
:
The OSPF Area Authentication parameter is set to none for all areas.
All timer parameters (Hello, dead, and poll interval) are set to their default
values.
No virtual links are configured.
Route summarization is not used.
The frame relay cloud is set to the default management type. It is non-fully
meshed with all group mode PVCs.
There are three area border routers (router 2, router 3, and router 4), two
internal backbone routers (router 1 and router 5) and one AS boundary router
(router 6 has an Ethernet interface using RIP).
Router 2 is the designated router for the FDDI segment. Router 4 must be the
designated router for the frame relay cloud.
The unnumbered LAN connecting router 6 and router D is included to ensure
that every internal node in area 0.0.0.1 is reachable from every other internal
node.
Przeglądanie stron 346
1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag