
Configuring IP, ARP, RIP, and OSPF Services
4-6
117356-E Rev 00
Selecting an Encapsulation Option for ARP and Probe
If you select ARP, Probe, or ARP/Probe, you must also select the appropriate data
link encapsulation option as follows:
• If your address-resolution scheme is ARP only, select Ethernet encapsulation,
SNAP encapsulation, or Ethernet/SNAP encapsulation.
• If your resolution scheme is HP Probe only, select LSAP encapsulation.
• If your resolution scheme is ARP/Probe, select Ethernet/LSAP encapsulation,
SNAP/LSAP encapsulation, or Ethernet/SNAP/LSAP encapsulation.
IP ignores this parameter if the underlying media is anything other than Ethernet.
By default, IP uses ARP Ethernet encapsulation. You can use Site Manager to
specify an encapsulation scheme.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the
Ethernet Arp Encaps
parameter.
Click on
Help
or see the parameter
description on page A-12
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Komentarze do niniejszej Instrukcji