
Site Manager Parameters
117356-E Rev 00
A-11
Parameter: TR End Station
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Off
Options: On
|
Off
Function: Specifies source routing over token ring selection.
Instructions: Specify On to enable source route end-station support.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.64
Parameter: TR Endstation ARP Type
Path: Configuration Manager > Protocols > IP > Interfaces
Default: STE
Options: STE
|
ARE
Function: Specifies the ARP type for an interface configured for token ring support.
Instructions: For spanning tree explorer (STE) ARP packets, use the default. For all route
explorer (ARE) packets, select ARE. Set the TR End Station parameter to On.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.127
Parameter: Redirect
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Indicates whether this interface sends out ICMP redirects. ICMP redirects are
messages sent by the router to alert a host that it should be using a different path
to route data.
Instructions: Set to Disable if you do not want this interface to send out redirects. For
example, in a frame relay network, two stations on the same network may not be
directly connected if the network is not fully meshed. Thus, in this case, you
would set the Redirect parameter to Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.70
Komentarze do niniejszej Instrukcji