Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 300)

Configuring IP, ARP, RIP, and OSPF Services

A-60

117356-E Rev 00

Parameter: Retransmit Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 5 seconds

Options: 1 to 360 seconds

Function: Indicates the number of seconds between link-state advertisement

retransmissions for adjacencies belonging to this interface. This value is also

used when retransmitting database description and link-state request packets.

This value should be well over the expected round-trip time. Although the

default value is 5, Bay Networks suggests the following values for this

parameter: for broadcast, 10 seconds; for point-to-point, 15 seconds; for

NBMA, 15 seconds; for point-to-multipoint, 15 seconds.

Instructions: Either accept the default value of 5 seconds or set the retransmit interval to

some other value from 1 to 360 seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.7

Parameter: Hello Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 15 seconds

Options: 1 to 360 seconds

Function: Indicates the number of seconds between the Hello packets that the router

sends on the interface. Bay Networks suggests the following values for this

parameter: for broadcast, 10 seconds; for point-to-point, 15 seconds; for

NBMA, 20 seconds; for point-to-multipoint, 15 seconds.

Instructions: Either accept the default value of 15 seconds or set the Hello Interval

parameter to another value from 1 to 360 seconds. This value must be the same

for the virtual neighbor and for all routers attached to the same network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.8

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 361 362

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 300