Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 163

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 362
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 162
Customizing RIP Services
117356-E Rev 00
5-33
Supplying Modification Values for a RIP Announce Policy
You can use the BCC or Site Manager to supply a value that RIP uses to modify
fields in a RIP update that matches the policy.
Using the BCC
To supply a modification value to an update that matches a policy, navigate to the
policy prompt (for example,
box; ip; rip; announce/pol_1
) and enter:
modify
A modification prompt appears for the policy.
To specify an override value, enter:
<parameter> <value>
parameter value
is one of the parameter/value pairs listed in Table 5-5.
5. Choose
Announce Policies
. The RIP Announce Policy Filters window
opens.
6. Click on
Add
. The RIP Announce IP Policy Filter
Configuration window opens.
7. Set the following parameters:
Name
Action
Rule Precedence
Click on
Help
or see the parameter
descriptions beginning on page B-8
.
8. Click on
OK
. You return to the RIP Announce Policy
Filters window.
9. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Site Manager Procedure
(continued)
You do this System responds
Przeglądanie stron 162
1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag