Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 151)

Customizing RIP Services

117356-E Rev 00

5-21

Specifying a Holddown Period

When RIP determines that a network is unreachable, RIP continues to advertise a

route to that network for a default holddown period of 90 seconds. If you enabled

dial-optimized routing on this interface, the default is 3 hours.

You can use the BCC or Site Manager to specify a holddown period from 15

seconds through 259,200 seconds (72 hours). For dial-optimized routing, the

maximum value is 3,628,800 seconds (6 weeks).

You should set the holddown timer to a value equal to three times the value of the

update interval (see “

Specifying an Update Interval” on page 5-18).

Using the BCC

To specify the holddown period, navigate to a RIP interface prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

holddown-timer

seconds

is the holddown period expressed in seconds.

For example, the following command sets the holddown timer to 60 seconds on IP

interface 2.2.2.2:

rip/2.2.2.2#

holddown-timer 60

rip/2.2.2.2#

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

5. Set the

Timeout Timer

parameter. Click

Help

or see the parameter description

on page A-65

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 151

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring IP, ARP, RIP, and OSPF Services