Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 107

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 362
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 106
Configuring and Customizing IP
117356-E Rev 00
3-45
Table 3-4. BCC Adjacent Host Parameters
Parameter Value/Default Description
state enabled (default)
disabled
Specifies the state of the adjacent host
definition
ip-address No default Specifies the IP address of the device for
which you want to configure an adjacent host
mac-address No default Specifies the physical address of the adjacent
host. Enter the MAC address as a 12-digit
hexadecimal number.
vpi-vci No default Specifies the physical address of the adjacent
host. Enter an ATM PVC address in the form
virtual path identifier/virtual channel identifier,
for example, 0/32.
nsap No default Specifies the physical address of the adjacent
host
dlci No default Specifies the physical address of the adjacent
host
wan-address No default Specifies the physical address of the adjacent
host
encapsulation ethernet (default)
snap
null
Specifies the adjacent host’s encapsulation
method. Select ethernet or snap (Service
Network Access Point) if you are defining a
point-to-point network interface or if the
adjacent host resides on an Ethernet. For an
adjacent host on an ATM logical IP subnet,
select snap or null.
type default (default)
e164
x121
Specifies the type of adjacent host
sub-address No default Specifies the subaddress used to establish an
SVC to the adjacent host
type-of-number international (default)
unknown
Specifies the type of number used to establish
an SVC to the adjacent host
Przeglądanie stron 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag