Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 285)

Site Manager Parameters

117356-E Rev 00

A-45

Parameter: Metric Cost

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces

Default: 1

Options: 1 to 65,535

Function: Indicates the cost of using this type of service on this interface. Bay

Networks suggests the following values for this parameter: for 100 Mb/s or

greater, 1; for Ethernet/802.3, 10; for E1, 48; for T1, 65; for 64 Kb/s, 1562;

for 56 Kb/s, 1785; for 19.2 Kb/s, 5208; for 9.6 Kb/s, 10416. This parameter

allows you to configure preferred paths. If you do want to configure a

preferred path, allow that path to retain the default value of 1 or assign it a

relatively low metric cost. Then, assign the less preferred paths a higher

metric cost value.

Instructions: Either accept the default value, 1, or enter a larger number for a slower path

or a backup route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.16

Parameter: Password

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces

Default: None

Options: Any ASCII string up to eight characters long

Function: Specifies the password used for this area. You can specify a password up to

eight ASCII characters in length that will appear in the authentication field of

all OSPF packets across this interface. This parameter is valid only when the

Authentication Type parameter for the area is set to Simplepassword.

Instructions: Enter the appropriate password. All routers in the same area must either have

no authentication or have the same password.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.17

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 361 362

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 285