Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 108

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 362
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 107
Configuring IP, ARP, RIP, and OSPF Services
3-46
117356-E Rev 00
Using Site Manager
To associate the IP address of an adjacent host with its physical address, complete
the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Adjacent Hosts
. The IP Adjacent Hosts window opens.
4. Click on
Add
. The IP Configuration window opens.
5. Set the following parameters:
IP Adjacent Host Address
MAC/ATM Address, DLCI, VPI/VCI
Host Encapsulation
Adjacent Host Address
Remote Party Sub-Address
Remote Party Type of Number
Adjacent Host Type
Click on
Help
or see the parameter
descriptions beginning on page A-30
.
6. Click on
OK
. The IP Adjacent Hosts window displays
the adjacent host you just configured.
7. Set the following parameters:
Enable
Next Hop Interface Addr
Click on
Help
or see the parameter
descriptions beginning on page A-30.
8. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Przeglądanie stron 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag