Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 141)

100

101

Customizing RIP Services

117356-E Rev 00

5-11

Sending Triggered Updates

RIP generates full routing updates at regular intervals. You can also configure RIP

to generate an update on a specified interface each time it recalculates a route’s

metric. Such an update is called a triggered update. A triggered update contains

only the routes that have changed. (RIP also sends full updates at regular intervals

on interfaces configured for triggered updating.)

By default, triggered updates are disabled on all interfaces configured for RIP.

You can use the BCC or Site Manager to enable and disable triggered updates on

this interface.

Using the BCC

To enable or disable triggered updates, navigate to a RIP interface prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

triggered-updates

<state>

state

is one of the following:

enabled

disabled

(default)

For example, the following command enables triggered updates on IP interface

2.2.2.2:

rip/2.2.2.2#

triggered-updates enabled

rip/2.2.2.2#

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 141

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring IP, ARP, RIP, and OSPF Services