Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 138)

100

101

Configuring IP, ARP, RIP, and OSPF Services

5-8

117356-E Rev 00

Supplying RIP Updates on an Interface

By default, RIP supplies RIP updates to neighboring networks on each interface.

You can use the BCC or Site Manager to disable and reenable this feature on an

interface as required.

Using the BCC

To disable or reenable RIP updates, navigate to a RIP interface prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

supply

<state>

state

is one of the following:

enabled

(default)

disabled

For example, the following command causes RIP to stop supplying updates on IP

interface 2.2.2.2:

rip/2.2.2.2#

supply disabled

rip/2.2.2.2#

Using Site Manager

To disable or reenable RIP updates, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

RIP Interfaces

. The IP RIP Interface Configuration

window opens.

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

(continued)

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 138

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring IP, ARP, RIP, and OSPF Services