Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 72

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 71
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-14
308628-14.00 Rev 00
Configuring BGP as a Soloist
By default, BGP runs as a soloist on a slot determined by the BGP soloist slot
mask. Nortel Networks recommends that the slot mask include only
nonforwarding slots, so that BGP operations (route calculation, for example)
occur on one slot while the other slots maintain maximum forwarding capability.
If the slot on which the soloist is running fails, BGP runs on an eligible slot. By
default, BGP considers all slots with IP interfaces to be eligible slots. You can use
the BCC or Site Manager to specify a slot for the BGP soloist.
Using the BCC
Navigate to the BGP prompt and enter:
slot-mask
<
slot>
slot
is one of the values listed in Table 5-2.
For example, the following command causes BGP to run as a soloist on slot 5:
/jointfilesconvert/106988/bgp#
slot-mask 5
/jointfilesconvert/106988/bgp#
Table 5-2. Slot Mask Parameter Values
Value Meaning
all-slots (default) BGP runs on all slots. (BGP is not a soloist.)
1 to 14 BGP is a soloist running on the specified slot.
Przeglądanie stron 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag