Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 38)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

3-2

308628-14.00 Rev 00

When you have successfully configured the circuit, the Select Protocols window

opens. Complete the steps in the following table:

For information about unnumbered interfaces, see “

Configuring an Unnumbered

IP Interface” on page 3-7.

You customize IP and BGP by modifying IP parameters. For information, see

Chapter 4, “Configuring and Customizing IP for BGP

.”

Site Manager Procedure

You do this System responds

1. In the Select Protocols window, select the

following protocols:

•

BGP

Then click on

The IP Configuration window opens.

2. Set the following parameters:

•

IP Address

•

Subnet Mask

•

Transmit Bcast Addr

•

UnNumbered Assoc Address

Click on

Help

or see the parameter

descriptions beginning on page A-28.

3. Click on

. The BGP Configuration window opens.

4. Set the following parameters:

•

Identifier

•

Local AS

Click on

Help

or ee the parameter

descriptions on page A-2

5. Click on

. The BGP Peer window opens.

6. Set the following parameters:

•

Peer Address

•

Peer AS

•

Local Address

•Peer Mode

Click on

Help

or see the parameter

descriptions beginning on page A-10.

7. Click on

. Site Manager enables default BGP

service.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 38

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)