Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 219)

Site Manager Parameters

308628-14.00 Rev 00

A-43

Parameter: ARP Server ATM Address User Part

Path: Configuration Manager > Protocols > IP > Interfaces

Default: None

Options: XX00000000000000 to FEFFFFFFFFFFFF

Function: Defines the user part (suffix) of the ATM address for the ATM ARP server on

your network. The user part consists of a 6-byte end station identifier and a

1-byte selector field.

Instructions: Enter the user part suffix of the ATM ARP server on your network. A complete

ATM address consists of a network prefix and a user part. Use the ARP Server

ATM Address Network Prefix parameter to supply the network part of the

ATM address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.113

Parameter: Registration Refresh Interval

Path: Configuration Manager > Protocols > IP > Interfaces

Default: 900 seconds for a client, 1,200 seconds for a server

Options: Any interval (in seconds)

Function: For a client, this parameter specifies the interval between registration refreshes.

For a server, this parameter specifies the duration for which the registration is

valid.

Instructions: Determine whether ATMARP is running as a client or as a server on this

interface and enter an appropriate value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.115

Parameter: TR Endstation Arp Type

Path: Configuration Manager > Protocols > IP > Interfaces

Default: STE

Options: STE

ARE

Function: Specifies the ARP type for an interface configured for token ring support.

Instructions: For spanning tree explorer (STE) ARP packets, use the default. For all route

explorer (ARE) packets, select ARE. Set the TR Endstation parameter to on.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.127

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 307 308

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 219