Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 243)

Routing Policies

308628-14.00 Rev 00

B-9

BGP-3-Specific Accept Policy Parameters

Parameter: Injection List

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept

Policies

Default: An empty list

Options: A list of network identifiers

Function: Specifies network IDs to be included in the routing table in place of the network

IDs listed in the received advertisement.

Instructions: Specify a non-null value only if the Action parameter is set to Accept. The

values you enter in the injection list determine the action taken. If you supply a

list of network IDs, these IDs are injected into the routing table instead of the

actual received IDs.

If you use the default (an empty list), the actual received network IDs are

injected into the routing table.

If you supply a list that includes the encoding 255.255.255.255/

255.255.255.255, the actual received network IDs are injected into the routing

table along with the other IDs in the injection list. This allows insertion of an

aggregate or default along with the actual networks.

The only valid network ID that you can include in an injection list is the default

ID, 0.0.0.0/0.0.0.0. This parameter replaces the received routes with the default

route and places the default route in the routing table. This parameter associates

the default route with the attributes of the best route that matches the policy.

If you are constructing a BGP-3 or BGP-4 accept policy, keep in mind that this

parameter does not perform route aggregation as defined in RFC 1654. To

aggregate routes in a transit AS, you must construct an announce policy and use

the announce Advertise parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.9

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 307 308

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 243