Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 230

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 229
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-54
308628-14.00 Rev 00
Adjacent Host Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: Enable
Options: Enable
|
Disable
Function: Specifies the state (active or inactive) of the adjacent host in the IP routing
tables.
Instructions: Select Disable to make the adjacent host record inactive in the IP routing table;
the IP router will not consider this adjacent host. Select Enable to make the
adjacent host record active again in the IP routing table.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.2
Parameter: Adjacent Host Address
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: None
Options: Any valid IP address
Function: Specifies the IP address of the device for which you want to configure an
adjacent host.
Instructions: Enter the IP address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.3
Parameter: Next Hop Interface Addr
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: 0.0.0.0
Options: A valid IP address
Function: Specifies the IP address of the router’s network interface to the adjacent host.
Instructions: Enter the IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.4
Przeglądanie stron 229
1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag