Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 184

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 183
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-8
308628-14.00 Rev 00
Parameter: IBGP ECMP Method
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Disabled
Options: Disabled
|
Route Balance
|
Traffic Balance
Function: Specifies whether IBGP uses ECMP paths provided by the IGP for route
balancing or traffic-load balancing.
Instructions: To configure IBGP to use IGP ECMP routes for route balancing, set this
parameter to Route Balance. To configure IBGP to use IGP ECMP routes for
traffic-load balancing, set this parameter to Traffic Balance.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.26
Parameter: Local Pref Calculation
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enabled
Options: Enabled
|
Disabled
Function: Disables BayRS local preference calculation of received EBGP routes.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.27
Parameter: Confederation ID
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: 0
Options: Any valid confederation identifier
Function: Specifies the BGP confederation identifier for this router.
Instructions: Set this parameter to the confederation identifier of this router. If this
autonomous system is not a member of any confederation, this parameter is not
available (nil).
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.28
Przeglądanie stron 183
1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag