
Starting BGP and EGP Services with Site Manager
308628-14.00 Rev 00
3-5
When you have successfully configured the circuit, the Select Protocols window
opens. Complete the steps in the following table:
Site Manager Procedure
You do this System responds
1. In the Select Protocols window, select the
following protocols:
•
IP
•
EGP
Then click on
OK
.
The IP Configuration window opens.
2. Set the following parameters:
•
IP Address
•
Subnet Mask
•
Transmit Bcast Addr
•
UnNumbered Assoc Address
Click on
Help
or see the parameter
descriptions beginning on page A-28.
3. Click on
OK
. The EGP Configuration window opens.
4. Set the following parameters:
•
Local Autonomous System ID
(decimal)
•
Remote Peer IP Address
•
Gateway Mode
Click on
Help
or see the parameter
descriptions beginning on page A-24.
5. Click on
OK
. Site Manager enables EGP service, and
returns you to the Configuration Manager
window.
Komentarze do niniejszej Instrukcji