Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 64

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 63
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-6
308628-14.00 Rev 00
Disabling and Reenabling IBGP Support
By default, BGP supports IBGP intra-AS sessions. (For information, see
Chapter 1, “Exterior Gateway Protocols (BGP/EGP)
.”)
A BGP transit AS should use IBGP intra-AS routing. A stub or multihomed AS
usually does not use IBGP routing.
You can use the BCC or Site Manager to disable and reenable the feature.
Using the BCC
Navigate to the BGP prompt and enter:
intra-as-routing
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command disables IGBP:
/jointfilesconvert/106988/bgp#
intra-as-routing disabled
/jointfilesconvert/106988/bgp#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
BGP
Intra-AS
parameter. Click on
Help
or see the parameter description on
page A-3
.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Przeglądanie stron 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag