Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 232)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-56

308628-14.00 Rev 00

Parameter: Adjacent Host X.121 Address

Path: Configuration Manager > Protocols > IP > Adjacent Hosts

Default: None

Options: Any valid IP address or X.121 address (X.25 only)

Function: Specifies the X.121 address of the adjacent host. Set this parameter only if you

configured X.25 as the data-link protocol and if this is a PDN/X.25, DDN/X.25,

or BFE/X.25 connection. This address is needed for those protocols that cannot

perform address resolution.

Instructions: Enter the appropriate X.121 address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.9

Parameter: Remote Party Sub-Address

Path: Configuration Manager > Protocols > IP > Adjacent Hosts

Default: None

Options: An SVC subaddress

Function: Specifies the subaddress used to establish an SVC to the adjacent host.

Instructions: Supply a valid SVC subaddress.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.10

Parameter: Remote Party Type of Number

Path: Configuration Manager > Protocols > IP > Adjacent Hosts

Default: International

Options: International

Unknown

Function: Specifies the type of number used to establish an SVC to the adjacent host.

Instructions: Supply the required value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.11

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 307 308

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 232