
Configuring IP Exterior Gateway Protocols (BGP and EGP)
7-4
308628-14.00 Rev 00
Table 7-1. BCC Definition Parameters for BGP Accept Policies
Parameter Values Function
state enabled (default)
disabled
Enables and disables the policy you have
created
action ignore (default)
accept
Specifies whether the protocol ignores a
route that matches the policy or forwards
the route to the routing table manager
preference 1 (default) to 16 Assigns a metric value (the higher the
number, the greater the preference) to a
route that the protocol forwards to the
routing table manager. If confronted with
multiple routes to the same destination,
the routing table manager may need to
use this value to decide which route to
insert. Routes for all networks (0.0.0.0/
0.0.0.0) should have the lowest
preference and routes for the most
specific networks (longest address and
mask) should have the highest
preference.
precedence 0 (default) to any
integer
Assigns a metric value to this policy (a
policy with a higher value takes
precedence over a policy with a lower
value). This value determines the order
of precedence for policies that match the
same route.
/jointfilesconvert/106988/bgp4-preference 1 (default) to 16 Specifies a value that can be used to
compare a route that matches this policy
with other BGP-4 routes. The larger the
value, the greater the preference.
as-weight-class class-1 to class-8 Indicates which weight class value
should be used when calculating the AS
path weight
route-damping enabled
disabled (default)
Configures BGP to perform route flap
dampening on a route that matches this
policy
route-damping-template default or a unique
template name
Configures BGP to use the default route
flap dampening template or the template
you specify
Komentarze do niniejszej Instrukcji