Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 182

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 181
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-6
308628-14.00 Rev 00
Parameter: BGP Dynamic Policy Change Support
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BGP dynamically reevaluates all routes affected by a policy
when you modify the policy.
Instructions: Select disable if you want BGP to restart all connections when you modify a
policy.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.19
Parameter: BGP Soloist Slots
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: All slots
Options: Slots 1 to 14
Function: Specifies slots on which the BGP soloist is eligible to run.
Instructions: Accept the default, all slots to enable BGP to run on all slots. To configure BGP
to run as a soloist on a particular slot, specify the slot number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.20
Parameter: Cluster Identifier
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Null
Options: 1 to 4294967295
Function: Associates the IBGP route reflector with a cluster.
Instructions: If this BGP router is configured as an IBGP route reflector in a cluster, you must
specify a cluster ID. All IBGP route reflectors in the same cluster must have the
same cluster ID.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.18
Przeglądanie stron 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag