Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Pobierz pdf (Strona 52)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

4-8

308628-14.00 Rev 00

The following parameter settings also help to optimize router performance and

operation:

By default, ISP mode features are disabled on the router. You can use the BCC or

Site Manager to enable and disable ISP mode as required.

Using the BCC

Navigate to the IP global prompt and enter:

isp-mode

<state>

state

is one of the following:

enabled

disabled

(default)

Using Site Manager

IP Parameter Setting

Route Filter Support Disabled

Maximum Policy Rules Set as required

Estimated Networks Set as required

Redirect Disabled at router interconnection points

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Global

. The Edit IP Global Parameters window

opens.

4. Set the

Enable

ISP Mode Support

parameter to Enable. Click on

Help

or see

the parameter description on page A-50

5. Click on

. The Edit Soloist Slot window opens.

6. Choose a slot and click on

. Site Manager returns you to the

Configuration Manager window.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 52

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)