Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Instrukcja Użytkownika Strona 212

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 308
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 211
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-36
308628-14.00 Rev 00
Parameter: TR Endstation
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Off
Options: On
|
Off
Function: Specifies source routing over token ring selection.
Instructions: Use the On option to enable the parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.19
Parameter: Redirect
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Indicates whether this interface sends out ICMP redirects. ICMP redirects are
messages sent by the router to alert a host that it should be using a different path
to route data.
Instructions: Reset to Disable if you do not want this interface to send out redirects. For
example, in a frame relay network, two stations on the same network may not be
directly connected if the network is not fully meshed. Thus, in this case, you
would set the Redirect parameter to Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.25
Przeglądanie stron 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 307 308

Komentarze do niniejszej Instrukcji

Brak uwag