Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Pobierz pdf (Strona 89)

100

101

Starting ATM, ATM MPOA Server, ATM Router Redundancy, and MPLS

117374-C Rev 00

3-3

Adding ATM to the Configuration

To add ATM to the configuration, navigate to the top-level prompt and enter:

atm slot

<slot_number>

[

module

<module_number>

]

connector

<connector_number>

slot_number

is the number of the chassis slot containing the link module.

module_number

is a convention used for other routers within the System 5000

chassis. You need only enter a module number when configuring an ATM router

in the System 5000 chassis (that is, the Model 5782 Centillion Multiprotocol

Engine). The module number for the ATM router is always 1.

connector_number

is the number of a connector on the link module.

For example, the following command adds ATM to the BN configuration on

slot 5, connector 1:

box#

atm slot 5 connector 1

atm/5/1#

Enabling Signaling (LANE and Classical IP Service Records Only)

To enable signaling on an ATM interface, navigate to the ATM prompt and enter:

signaling

For example, the following command enables signaling on slot 5, connector 1:

atm/5/1#

signaling

signaling/5/1#

Note:

The top-level prompt for BCC configuration on the System 5000

platform is “stack.” However, the remainder of this guide uses the “box”

prompt associated with the BN platform in its examples.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 528 529

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Strona 89

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring ATM and MPLS Services