Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Pobierz pdf (Strona 136)

100

101

Configuring ATM and MPLS Services

4-10

117374-C Rev 00

Using Site Manager

To assign the framing mode to an ATM line, complete the following tasks:

Defining the Clocking Signal Source

You can specify either an internal or external clocking source for time signals.

Internal clocking uses the router clock; external clocking uses the line clock.

Using the BCC

To change the source of the ATM clocking signal, navigate to the atm prompt (for

example,

box; atm/11/1

) and enter:

clock-signal-source

source

is either internal (default) or external.

For example, the following command changes the ATM clocking signal source to

external:

atm/11/1#

clock-signal-source external

atm/11/1#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

Line Attributes

. The ATM/ARE Line Driver Attributes

window opens.

3. Set the

Framing Mode

parameter. Click

Help

or see the parameter description

on page A-9.

4. Click on

. You return to the Select Connection Type

window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 528 529

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Strona 136

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring ATM and MPLS Services