Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Pobierz pdf (Strona 213)

100

101

Customizing Signaling

117374-C Rev 00

5-65

Setting the SSCOP Maximum Poll Data Value

The SSCOP maximum poll data value sets the maximum value of the poll data

state variable before transmitting a POLL PDU. The poll data state variable

increments upon transmission of a sequenced data PDU and resets to 0 upon

transmission of a POLL PDU.

By default, the maximum poll data value sets the poll data state to 25. However,

you can set this parameter to any value from 1 to 120.

Using the BCC

To change the maximum poll data value, navigate to the SSCOP prompt (for

example,

box; atm/11/1; signaling/11/1; sscop/11/1

) and enter:

pd-before-poll-maximum

integer

is the count value that you want the controller to use.

For example, the following command changes the maximum poll data value to 50:

sscop/11/1#

pd-before-poll-maximum 50

sscop/11/1#

Using Site Manager

To change the maximum poll data value, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

Signaling AAL (SAAL)

. The ATM Signaling AAL Records List

window opens.

4. Set the

Max PD Before Poll

parameter.

Click on

Help

or see the parameter

description on page A-66.

5. Click on

Done

. You return to the Edit ATM Connector

window.

(continued)

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 528 529

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Strona 213

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring ATM and MPLS Services