Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Pobierz pdf (Strona 117)

100

101

Starting ATM, ATM MPOA Server, ATM Router Redundancy, and MPLS

117374-C Rev 00

3-31

Adding the LDP Session Record

After you create an ATM circuit over which MPLS can operate, you must add an

LDP session record to that circuit. For information about creating an ATM circuit,

see “Creating an ATM Circuit

” on page 3-30

To add an LDP session record, complete the following tasks:

Note:

This release supports only one LDP session record per ATM interface.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an ATM link module interface

(

ATM1

The Add Circuit window opens.

2. Click on

to accept the default circuit

name.

The Select Connection Type window

opens.

3. Click on

MPLS

. The Edit MPLS Connector window opens.

4. Click on

LDP

. The LDP Session Records List window

opens.

5. Click on

Add

. The LDP Session Record Parameters

window opens.

6. Set the following parameters:

• Local IP Address

• Remote IP Address

Click on

Help

or see the parameter

descriptions beginning on page A-79.

7. Click on

. The Default VC Record Parameters

window opens.

8. Click on

. The Select Protocols window opens.

9. Go to the following section, “Adding

Protocols to the LDP Session,” or go to

step 10 to exit this procedure.

10. Click on

Cancel

. You return to the LDP Session Records

List window.

(continued)

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 528 529

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring ATM and MPLS Services Instrukcja Użytkownika Strona 117

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring ATM and MPLS Services