
Using Technician Interface Software
8-46 114088 Rev. A
Setting the ACE Backplane Type
The backplane command allows you to set or display the ACE backplane type in
nonvolatile RAM. You issue the
backplane command during the initial startup of
your VME-based Bay Networks router. You need only enter the
backplane
command once during the life of the system controller installed in Slot 1 of the
router, unless you insert the system controller in another type of VME router. For
instructions on using the
backplane command, see Quick-Starting Routers and
BNX Platforms.
Enter the following command to set the ACE backplane type in nonvolatile RAM.
<type> is the VME-based router type (ALN, LN, CN, or FN).
backplane
<type>
If you issue the backplane command without specifying a type, the system
displays the router’s backplane type to the screen.
Examples:
Resetting the Date and Time
The date command allows you to display or change the system date, time, or time
zone offset. The time is based on the 24-hour clock. The offset is the time
difference between the current time and Greenwich Mean Time (GMT).
Enter the following
to display the system date, time, and GMT offset:
date
If you enter: The system:
backplane
Reads the backplane type from the hardware and
displays the type to the screen.
backplane LN
Sets the backplane type to LN. Use for LN or ALN.
backplane CN
Sets the backplane type to CN.
backplane FN
Sets the backplane type to FN.
Komentarze do niniejszej Instrukcji